Sat-Forum.Net

Posted: **27 Dec 2022, 21:32**

I have an Edision OS Nino Plus reception box, I need the IPK file compatible with my OSCAM service, but my provider doesn't help me and I don't know if the service is configured correctly.
I have already the files , arm file, oscam.conf ; oscam.server ; oscam.user
Can you give me a help?

Posted: **27 Dec 2022, 21:34**

Which image used you currently ??

Posted: **27 Dec 2022, 22:05**

try to install latest Oscam through plugins download , then replace the files which you have

Posted: **28 Dec 2022, 00:10**

The Founder wrote: ↑27 Dec 2022, 21:34 Which image used you currently ??

OpenATV 6.4 for Edision OS nino plus "openatv-6.4-osninoplus-20221118_usb.zip" from http://images.mynonpublic.com/openatv/6 ... osninoplus

And following the steps from

https://www.enigma2.net/image-openatv-6 ... nino-plus/

Posted: **28 Dec 2022, 00:11**

Rizwan awan wrote: ↑27 Dec 2022, 22:05 try to install latest Oscam through plugins download , then replace the files which you have

because that's what I've been doing and how it doesn't work and that's why I've been asking for help.

Posted: **28 Dec 2022, 08:33**

Iznogoud wrote: ↑28 Dec 2022, 00:10
The Founder wrote: ↑27 Dec 2022, 21:34 Which image used you currently ??
OpenATV 6.4 for Edision OS nino plus "openatv-6.4-osninoplus-20221118_usb.zip" from http://images.mynonpublic.com/openatv/6 ... osninoplus

And following the steps from

https://www.enigma2.net/image-openatv-6 ... nino-plus/

Helo donwload this file put in temp folder via dcc or other ftp apps

How to install
Go to software management and there extension install showing there softcam feed name ipk and press ok and install started after reboot box then go to plugins select softcams all showing here

Code: Select all

https://www.mediafire.com/file/qpdqlr1xugjqm1k/OpenATV_softcam_feed_v9.0-mySATBOX.TV.ipk/file

Posted: **29 Dec 2022, 05:02**

The Founder wrote: ↑28 Dec 2022, 08:33
Iznogoud wrote: ↑28 Dec 2022, 00:10
The Founder wrote: ↑27 Dec 2022, 21:34 Which image used you currently ??
OpenATV 6.4 for Edision OS nino plus "openatv-6.4-osninoplus-20221118_usb.zip" from http://images.mynonpublic.com/openatv/6 ... osninoplus

And following the steps from

https://www.enigma2.net/image-openatv-6 ... nino-plus/

Helo donwload this file put in temp folder via dcc or other ftp apps

How to install
Go to software management and there extension install showing there softcam feed name ipk and press ok and install started after reboot box then go to plugins select softcams all showing here
Code: Select all
https://www.mediafire.com/file/qpdqlr1xugjqm1k/OpenATV_softcam_feed_v9.0-mySATBOX.TV.ipk/file

Hello again

I did a new installation of all OpenATV 6.4 on my OS Nino Plus box

I installed the IPK file you sent me. It was successfully installed as you can see in the image, Take a look At the images I attached

I Reboot the Box

The OSCAM menu does not appear nor the respective files that could replace the files. Take a look At the images I attached

How can I resolve this?

Thanks again

Posted: **29 Dec 2022, 08:18**

Iznogoud wrote: ↑29 Dec 2022, 05:02
The Founder wrote: ↑28 Dec 2022, 08:33
Iznogoud wrote: ↑28 Dec 2022, 00:10

OpenATV 6.4 for Edision OS nino plus "openatv-6.4-osninoplus-20221118_usb.zip" from http://images.mynonpublic.com/openatv/6 ... osninoplus

And following the steps from

https://www.enigma2.net/image-openatv-6 ... nino-plus/

Helo donwload this file put in temp folder via dcc or other ftp apps

How to install
Go to software management and there extension install showing there softcam feed name ipk and press ok and install started after reboot box then go to plugins select softcams all showing here
Code: Select all
https://www.mediafire.com/file/qpdqlr1xugjqm1k/OpenATV_softcam_feed_v9.0-mySATBOX.TV.ipk/file
Hello again

I did a new installation of all OpenATV 6.4 on my OS Nino Plus box

I installed the IPK file you sent me. It was successfully installed as you can see in the image, Take a look At the images I attached

I Reboot the Box

The OSCAM menu does not appear nor the respective files that could replace the files. Take a look At the images I attached

How can I resolve this?

Thanks again

Its softcam feed done installed
Now you go to menu and see there plugins option press green button for downloading plugins after selecting softcam there show latest oscam emu ncam emu mgcam cccam all softcams press ok and install after go to softcam manager select softcam and putin configuration reboot box

Posted: **29 Dec 2022, 08:30**

You have to almost done just follow this

Menu/Plugin

: 4237408A-343C-4A1D-A531-2FA5802B27F2.jpeg (59.05 KiB) Viewed 2045 times

Posted: **01 Jan 2023, 23:21**

Thanks for the help so far.

I'm a little lost at this stage, as there are several options and I don't know which one to choose in order to be compatible.
I have already tried one of them, with the following steps.
1 - I downloaded the plugin.
2 - Replaces the arm file and kept the original file name
3 - Replace oscam.conf, oscam.user and oscam.server files
4 - I restarted the box
5 - I was not successful in decoding the channels

How do you think I can move forward?

Sat-Forum.Net

Edision OS Nino Plus OSCAM Help

Edision OS Nino Plus OSCAM Help

Re: Edision OS Nino Plus OSCAM Help

Re: Edision OS Nino Plus OSCAM Help

Re: Edision OS Nino Plus OSCAM Help

Re: Edision OS Nino Plus OSCAM Help

Re: Edision OS Nino Plus OSCAM Help

Re: Edision OS Nino Plus OSCAM Help

Re: Edision OS Nino Plus OSCAM Help

Re: Edision OS Nino Plus OSCAM Help

Re: Edision OS Nino Plus OSCAM Help